cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1295
Views
5
Helpful
5
Replies

Authentication between AP and WLC

vijay kumar
Level 5
Level 5

Hi all ,

Is there anyway to authenticate the AP before joins the WLC for security purpose?

Thanks,

Vijay.

1 Accepted Solution

Accepted Solutions

MMC

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***

View solution in original post

5 Replies 5

Scott Fella
Hall of Fame
Hall of Fame

Here you go

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00808c7234.shtml

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***

Hi Scott ,

What is the certificate will be there in Ap 3600 ? MIC or SSC?

Thanks,

Vijay

MMC

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***

Thanks  scott for the claification...

Abhishek Abhishek
Cisco Employee
Cisco Employee

Hello ,

As per your query i can suggest you the following solution-

In versions earlier than 5.0 , WLCs sends Mobility Messages with unicast mode, where the copies of Mobility Messages are unicast to all the WLCs in the Mobility Group. But in version 5.0 , Mobility Messages can be sent as Multicast messages wherein only one copy of the Mobility Message is sent to reach all the WLCs in the Mobility Group. Refer to the Messaging among Mobility Groups section of Cisco Wireless LAN Controller Configuration Guide, Release 7.0 for more information

Hope this will help you.

Review Cisco Networking for a $25 gift card