Autheticaction 802.1x

[nstr1]

I have a Cisco 9800 (version 16) on this I have my SSID set to 802.1.

And my RADIUS server is an ISE (version 3).

Recently I wanted to connect with my Android version 11 but my device asks me for different parameters to authenticate.

It only happened with androin on Windows or MAC which didn't show anything about the parameters.

This is due to the configuration of the ISE or the WLC ???

[Flavio Miranda]

Probably you need to select EAP-TLS on the top. And you need to have certificate provisioned on the Android device. Otherwise, 802.1x will not work.

[nstr1]

i tried but its the same case

[JPavonM]

From Android version 11 it doesn't allow to select "No validate" into server certificate option.

So you need to deploy 802.1X using a public signed certificate or a private certificate which you have to upload into Android, which is not an easy task and needs from user interaction or the use of a MDM solution.

[nstr1]

I'm going to try that option