07-09-2020 02:59 AM - edited 07-05-2021 12:15 PM
Hi,
We have converted to autonomous using the latest ap3g2-k9w7-tar.153-3.JPJ3a.tar. But we can't get the web interface working. Had to 'ip http server' and created a user/password new user before I can get to the AP. However, instead of the usual web interface, I get the second screen shot below. We have converted a few C1412 with no issue. But I don't know why an autonomous AP does not have a web interface.
Thank you for any input.
Solved! Go to Solution.
07-09-2020 09:09 PM
07-09-2020 09:39 PM
This 153-JH is working with web Interface.
1. Loaded the firm ap3g2-k9w7-tar.153-3.JH.tar from April 2018
2. Reboot
3. Reset all config
4. Reboot
Web Interface comes up nicely.
07-09-2020 03:00 AM
Just to add, we thought the latest image had an issue, so we picked a sightly older JPI4 version ( Dec 2019 ), but still no web interface.
07-09-2020 06:59 AM
07-09-2020 07:42 AM
07-09-2020 08:48 AM
07-09-2020 08:55 AM
07-09-2020 08:02 PM
Tested on a Firefox, Safari + Chrome, even incognito. MD5 checks out on the firmware. Also tried a few firmware, from the latest to the one last year. Still no web interface. On new firmware
ip http server, username admin privil 15 pass admin, ip http authentication local
07-09-2020 09:09 PM
07-09-2020 09:28 PM
Thanks for the advice. Used ap3g2-k9w7-tar.153-3.JH.tar with the command archive download-sw /overwrite /reload tftp://location/image-name.
Still no ball, 153-3.JH unpacks and loads correctly, but still no web interface, or rather, a web interface without the autonomous screen that we are used to.
07-09-2020 09:39 PM
This 153-JH is working with web Interface.
1. Loaded the firm ap3g2-k9w7-tar.153-3.JH.tar from April 2018
2. Reboot
3. Reset all config
4. Reboot
Web Interface comes up nicely.
07-09-2020 10:14 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide