AVC statistics don't display statistic

[LAN team]

Hello,

On a 5520 WLC v8.3.143, AVC profile and visibility are enabled but there isn't any statistic :

AVC Visibilty.................................... Enabled
AVC Profile Name................................. Rate-limit-50M

...............

(UCH225-0MCCACT5508) >show avc statistics top-apps

AVC Statstics is 0 for all applications.

Is there something else to enable ?

Thank you,

[patoberli]

AP in local or Flexconnect?

Which version on the WLC?

AVC Profile assigned to the SSID?

Client connected to the SSID?

[LAN team]

AP in local or Flexconnect? => Local

Which version on the WLC? => 8.5.151.0

AVC Profile assigned to the SSID? Yes, of course.

Client connected to the SSID? Yes, many client, always more than 100.

[patoberli]

That sounds good. 

Do you use AP groups? If yes, is in those AP groups SSID configuration the AVC profile also correctly assigned? 

Here some CLI commands to try: https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-8/AVC_8point8_dg.html#pgfId-84847

[LAN team]

Hi,

Thanks for your help.

Yes we use AP-Group but AVC has to be set on SSID level not on AP-group level.

[patoberli]

What happens if you remove the AVC profile from the SSID, Apply, add it again, Apply?

In the CLI, what is the result of this?

show avc protocol-pack version