02-25-2013 03:19 PM - edited 07-03-2021 11:37 PM
Does anyone have any other method of staging/priming their Cisco 1552 mesh access points?
I have four to work with for a pilot, but they did not come with bench power supplies or power cords. They'll power up with 802.3af power, and even a power injector leftover from a Cisco 1252 access point, however the radios do not want to power up.
Anyone have any tricks to bench test them/prime them?
Thanks in advance!
02-25-2013 03:22 PM
Oh boy... You are out of luck here without a power injector or the AC cable. You really need those when you stage the AP and that is what I do. I have the power injector for the RAP and the AC for the maps.
Sent from Cisco Technical Support iPhone App
02-25-2013 03:31 PM
I was hoping there was a way to open it up and plug in an AC power cord in some way.
02-25-2013 03:34 PM
Not really. Even the kit for hard wire has an adapter. I guess you can be risky and rig one, but I wouldn't.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide