cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
324
Views
0
Helpful
4
Replies

Binding interfaces on WLC 5508

Mark Jensen
Beginner
Beginner

               Hello, I would like information on binding multiple intefaces from the WLC to a Cisco switch for more bandwidth. Can someone point me in the right direction for this? thank you  

1 Accepted Solution

Accepted Solutions

One more doc:

https://supportforums.cisco.com/docs/DOC-23515

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***

View solution in original post

4 Replies 4

Scott Fella
Hall of Fame Guru Hall of Fame Guru
Hall of Fame Guru

Here are some links.  You need to have LAG enabled on the WLC and then you need to create an etherchannel to your switch.  You can connect the WLC to multiple switches if they are in VSS.

https://supportforums.cisco.com/docs/DOC-20587

http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_ports_interfaces.html

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***

One more doc:

https://supportforums.cisco.com/docs/DOC-23515

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***

Thanks these should do it for me.  

No problem... thanks for rating!

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: