Bridge and Client Mode for dual radio 3502

[mthurman]

I want to use my dual radio 3502e AP to service clients on the 2.4 MHz and do a point to point bridge on the 5 GHz.  Is that possible?

[Jeffrey Keown]

Hi,

3500 series AP's are technically only supported in lightweight (controller based) mode.

7.0.116.0 allows 3500's (as well as most other models) to operate in mesh mode.  This would be a better alternative.

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_0_116_0.html#wp673954

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080b1c101.shtml