Before I go purchasing new stuff I need to know if this will work.I have 12 1130ag's in a building being managed by a 2100 wlc.We're thinking of replacing the 1130's with the 2602. Will the 2602's work with a 2100?We also have a 2504 that can have mo...
Hello!We have cisco 1941 as router in office, it's dhcp server, it has only vlan 1 192.168.4.0/24I've set up 1142 ap for wireless clientsHow can i make it give clients ips from dhcp server from vlan 1 ?
Hi allJust wanted to ask if anyone else is getting this error message when trying to configure a OEAP600 AP in NCS 1.2.Description:When trying to configure a OEAP600 AP in NCS1.2, fx. setting a new AP Group Name, and pressing save, a error pops up te...
Hi thereI just saw the AVC feature in WLC version 7.4.100.0 and wonder, if there is a possibility to select a AVC profile per user, based on it's RADIUS authentication via ACS.For example:- A user in group teacher can access youtube on SSID A- A user...
Hi,I have Cisco Wireless Lan Controller 5508 with 35 (3600 Series Access Points. Do i need to purchase Mobility Service Engine for this or no need? Do i need WCS server for this or no need? Thanks,
Hello,we have two WLC model 5508 with software version 7.0.116.0 (25 ap supported for each), i tried to add a new access point air-lap1131ag-e-k9 but after five minuts (maximum) the ap reboot, i replaced : - power injector- AC/DC adapter- patch ether...
Hi,We're running AIR-WLC2112-K9 with software versions 6.0.196.0 and 5.2.193.0. When we view the backups all IP addresses within the DHCP and Multicast configuration are in reverse format. If we try a restore using the backed up file it fails becaus...
Hi ,I am using the below setup .In this . If my distribution switch connecting to the Active wlc down ,then Wlc wont reach gateway. But anyway , through RP port it will response to standby wlc . So AP's wont switover to standby WLC. Or thru Redundant...
Hi,Cisco best practices states that no more then 25 associations per AP, otherwise wireless bandwidth issues would occur.Is it 25 associations "PER AP" or is it "PER BAND e.g 2.4Ghz and 5.0Ghz" which equals to 50 associations (25 on 2.4Ghz and 25 on ...
HI ,does WLC 2504 works whit AIR-AP1231G-E-K9 and whit AIR-BR1310G-E-K9 after I upgraded form AP to LAP the AP ?any cisco documentation is more than welcome TK CARLO
Dear All,We installed Cisco 2911 router with SRE 700 WLC module in it. The main problem is we have 3 apple air port and 1 apple tv deivce connected on network if i connect my computer thourgh local LAN cable i am not see all the apple device but once...
Hi Group, how are you?.I'm having problems with Android devices and web authentication. When devices Android associated to the SSIDs doesnt open a browser not appear any popup, and applications such as SKYPE that doesnt need browser not work. Inste...
HelloI intend to connect a small network outside the main building by a mesh point to point link. In this small network are several vlan's in the ethernet network active. Is it possible to use the mesh point to point link as a trunk with tagged vlan'...
I have insatllaed Prime NCS on a physical server, the install on the box went smoothly. I tried to logonto the webpage, which was unavailable? did an NCS Status on the box and had the following output: ABM-PRIME-NCS/admin# ncs status...
Hi all.We have a campus with both office and industial areas with various propagation problems. Historically I have been installing and maintaining access points in the 1200 range, the latest being the 1242. All these have a similar antenna setup bas...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 10-15-2026 05:58 PM | ||
| 10-12-2026 06:46 PM | ||
| 09-30-2026 07:34 AM | ||
| 08-10-2026 11:32 AM | ||
| 08-06-2026 09:29 PM |
| User | Count |
|---|---|
| 5 | |
| 2 | |
| 1 | |
| 1 | |
| 1 |
