05-14-2013 12:37 AM - edited 07-04-2021 12:04 AM
Hi guys,
Can you suggest any other products/solutions if ISE is just too much expensive or just does not scale?
For example if we have 5-10 APs and we want to use BYOD services, use secure EAP-TLS tunnel on our WiFi network. How to get yours iPad secure?
Solved! Go to Solution.
05-14-2013 04:34 AM
Just use radius... You can use either Microsoft Radius or even ACS to do EAP-TLS or any EAP type security. I use PEAP because I don't want to install a cert on my iPad:). Radius would tie into AD and you can set your policies there. You will not have any profiling, so radius will not know what device is what. That is what ISE does.
Sent from Cisco Technical Support iPhone App
05-14-2013 04:34 AM
Just use radius... You can use either Microsoft Radius or even ACS to do EAP-TLS or any EAP type security. I use PEAP because I don't want to install a cert on my iPad:). Radius would tie into AD and you can set your policies there. You will not have any profiling, so radius will not know what device is what. That is what ISE does.
Sent from Cisco Technical Support iPhone App
05-14-2013 04:39 AM
Thank you Scott! As always!
05-14-2013 04:41 AM
No problem... If you are a Microsoft shop it would be cheaper to just bring up a new Microsoft radius server or add the IAS/NPS role to an existing server.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide