C9120AXE ssh, mgmt user connfiguration

[mayer-felix]

Hi there,

can anybody tell me how to configure ssh and the mgmt user on C9120 access point via cli?

Thanks in advance for the assistance.

[balaji.bandi]

what Mode AP  running ? is this managed by WLC ?

[mayer-felix]

It will be managed by WLC, I know how to configure these settings on the WLC. But wondered if it is also possible to configure it via the cli

[Sandeep Choudhary]

If its managed by Mobility express then here is the procedure :

Hi,

First login to ME (WLC) then click on...

Step 1 Navigate to Wireless Settings > Access Points.
Step 2 Click on the Global AP Configuration button and configure the following under the Credentials(SSH) tab:
Username
Password
Enable Password
Step 3 Click Apply.

If its managed by a Hardware normal WLC (2504/3504/5508..etc) then here is the procedure:

https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/m_configuring_global_credentials_for_access_points.html

Regards

Dont forget to rate helpful posts

[balaji.bandi · Accepted solution]

If this is managed by WLC, you need to make config changes on WLC only as per i know.

until you do that you not able to login to AP.