C9124 Mesh VLAN question

[Alex49]

Hi to all,

I need the secondary POE OUT Port on the C9124 in vlan 99

RAP switch config > trunk with native vlan 201 , which is my mgmt for my access points

RAP config > see picture 1

MAP config > see picture 2

I can ping RAP and MAP. 

VLAN Transparent and Ethernet Bridging is enabled

How can I assign the POE OUT Port on the MAP to vlan 99 to connect a camera

Thanks in advance

Alex

[marce1000]

          - FYI : https://bst.cloudapps.cisco.com/bugsearch/bug/CSCwf93499

 M.

[Rich R]

I guess it depends whether you're trying to bridge vlan 99 from RAP to MAP which should work or MAP to WLC which will not work as per the bug Marce referenced.

Any reason why you don't have VLAN Trunking Native ticked while configuring a native VLAN on the MAP port?

Have you configured Ethernet Bridging on the mesh profile as per https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/215100-join-mesh-aps-to-catalyst-9800-wireless.html for the bridging to work?