C9800 environment with 9130s & 802.11ac/Wave1 APs: AKA Salt & Pepper

[nowires01]

I have a Health Care Customer about to Implement C9800s in local mode in HA - 9130s:

• Has there been any feedback or Caveats reported/known with client devices roaming from 9130.ax to 2800.ac/2700.wave1 environment? A little salt and pepper? IMO..I don’t recommend it from our past experience in dealing with salt and pepper of Cisco APs and the mix of protocols being supported, etc.   If you have anything to share or some insight with the C9800s and 9130s in a mix AP environment. Please DM or share to all.  Have a great day, adn TIA

[Rasika Nayanajith · Accepted solution]

Yes, it is not a recommended approach. Go with 9130 across a floor rather mix with 3802/2802

HTH

Rasika

[nowires01]

Greatly appreciated Rasika... That's what others have responded with internally as well. Thanks again.