02-15-2024 03:09 AM
Hi all.
We got a customer who are trying to connect Sonos ONE SL to their IOT SSID this works fine. but when it comes to connect / cast to the devices it doesn't work. They are all connected to same WLAN / SSID on the WLC but its handed off to our Anchor controller.
Both are C9800 with 17.9.4a would have thought that just having mdns bridging allowed on both foreign / anchor would solve the issue. But it doesnt. the Sonos APP finds the devices but cant connect to them,
Done some packet captures and i can see MDNS query's to (224.0.0.251 )
Do we have to setup mdns gateway on the anchor in order to get this working ?
Solved! Go to Solution.
02-15-2024 12:32 PM
The anchor scenario is discussed in the config guide at https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-9/config-guide/b_wl_17_9_cg/m_mdns_gateway.html#id_97319 and https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/215352-configure-and-troubleshoot-mdns-on-catal.html#toc-hId-258735693 and see also https://www.cisco.com/c/dam/en/us/td/docs/wireless/controller/9800/17-3/deployment-guide/c9800-mDNS-technical-guide-rel-17-3.pdf
02-15-2024 05:09 AM
- Checkout this discussion : https://www.reddit.com/r/Cisco/comments/17vjqac/sonos_and_a_9800_wlc/
M.
02-15-2024 05:19 AM
Thanks marce1000 i have read this thread before, but doesn't seem to bring the solution
02-15-2024 05:44 AM
- You may always checkout the configs of both anchor & foreign with WirelessAnalyzer ; chances are slim that it can help for this specific topic but it's worth a try : use CLI show tech wireless ; and feed the output into Wireless Config Analyzer
Use it for both controllers!
M.
02-15-2024 12:32 PM
The anchor scenario is discussed in the config guide at https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-9/config-guide/b_wl_17_9_cg/m_mdns_gateway.html#id_97319 and https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/215352-configure-and-troubleshoot-mdns-on-catal.html#toc-hId-258735693 and see also https://www.cisco.com/c/dam/en/us/td/docs/wireless/controller/9800/17-3/deployment-guide/c9800-mDNS-technical-guide-rel-17-3.pdf
02-21-2024 10:14 PM
Enabled it this morning, and now we see clients in mDNS services. Thank you for the input
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide