cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1552
Views
0
Helpful
1
Replies

C9800 WLC Device SNMP Queries Problems

Hi Team,

 

We have problem with Cisco WLC below SNMP queries outputs. OIDs are right and we fetched OIDs from CISCO-LWAPP-AP-MIB file. Other type of WLCs devices are giving response but this device is not giving response.

Can you help me how can we solve this issue ?

OIDs:

cLApWlanStatsAssocClientNum = .1.3.6.1.4.1.9.9.513.1.9.1.1.6 - Request failed or timed out. No error

cLApWlanStatsRxOctetNum = .1.3.6.1.4.1.9.9.513.1.9.1.1.4 - Request failed or timed out. No error

cLApWlanStatsTxOctetNum = .1.3.6.1.4.1.9.9.513.1.9.1.1.2 - Request failed or timed out. No error

Device details are below ;

sysObjectID.0:-->.iso.org.dod.internet.private.enterprises.9.1.2861
***************************************************************************************************
sysDescr.0:-->Cisco IOS Software [Bengaluru], C9800 Software (C9800_IOSXE-K9), Version 17.4.1, RELEASE SOFTWARE (fc5)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2020 by Cisco Systems, Inc.
Compiled Thu 26-Nov-20 23:34 by mcpre

 

Thanks and Regards.

1 Reply 1

marce1000
Hall of Fame
Hall of Fame

 

 - FYI https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvu26309/?rfs=iqvred

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '
Review Cisco Networking for a $25 gift card