Can access HTTPS to WLC 2504 other than 'management' interface

[johnlloyd_13]

hi all,

per subject, is it possible to HTTPS to WLC using other interface?

we plan to NAT to a public IP the VLAN 2 interface for our vendor's access.

so far i could ping from my home internet but can't HTTPS.

[Prakash Parvathala]

Hi

Please use the below links may be help you

https://supportforums.cisco.com/document/102661/troubleshooting-network-access-telnetsshhttphttps-wireless-lan-controller

https://supportforums.cisco.com/discussion/11859111/web-access-wlc-management

[johnlloyd_13]

hi,

thanks for the links. i saw we can enable HTTPS access on the dynamic interface used by SSID/WLAN but can this be access from outside (internet) and NOT from a wireless LAN client.

b. Additionally, you can use the following command to access the controller via the dynamic interface mapped to the ssid/wlan the wireless client is connecting on: 

(Cisco Controller) > config network mgmt-via-dynamic-interface enable 

(Cisco Controller) >show network summary

Mgmt Via Wireless Interface................. Disable

Mgmt Via Dynamic Interface.................. Enable