02-17-2011 04:54 PM - edited 07-03-2021 07:50 PM
I'm out at a remote site and we've been futzing with configuring this to be the site's WAP. But it's looking like it's
meant to only be used in conjunction with a central controller. Is there any way to have it work like a stand-alone
device like the good old 1200 (which I am missing very much at the moment).
Solved! Go to Solution.
02-17-2011 05:07 PM
According to the Cisco Software Download Centre, you can load autonomous IOS into the 1040 AP.
Products
Wireless
Access Point
Cisco Aironet 1040 Series
Cisco Aironet 1040 Series Access Point
IOS Software
Follow the proceedure below to convert the AP from CAPWAP to Autonomous IOS.
02-17-2011 05:07 PM
According to the Cisco Software Download Centre, you can load autonomous IOS into the 1040 AP.
Products
Wireless
Access Point
Cisco Aironet 1040 Series
Cisco Aironet 1040 Series Access Point
IOS Software
Follow the proceedure below to convert the AP from CAPWAP to Autonomous IOS.
02-17-2011 07:59 PM
That is a huge help setting up an office on the opposite coast (NYC). I'll head to the download site
straight away! Thank you.
02-17-2011 08:08 PM
Glad to be of assistance.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide