Can Cisco 1041N WAP Be Configured as a Stand-alone device

[mmedwid]

I'm out at a remote site and we've been futzing with configuring this to be the site's WAP.  But it's looking like it's

meant to only be used in conjunction with a central controller.  Is there any way to have it work like a stand-alone

device like the good old 1200 (which I am missing very much at the moment).

[Leo Laohoo · Accepted solution]

According to the Cisco Software Download Centre, you can load autonomous IOS into the 1040 AP.

Products
Wireless
Access Point
Cisco Aironet 1040 Series
Cisco Aironet 1040 Series Access Point
IOS Software

Follow the proceedure below to convert the AP from CAPWAP to Autonomous IOS.

Using a TFTP Server to Return to a Previous Release

[mmedwid]

That is a huge help setting up an office on the opposite coast (NYC).  I'll head to the download site

straight away!  Thank you.

[Leo Laohoo]

Glad to be of assistance.