Can I use same interface for two FlexConnect SSIDs

[uzair1980]

Foreign & Anchor WLC 5800 ver: 8.2.166.0
We have SSID for guests, 'visitors_HQ' that is centrally switch and egress from HQ with webauth enable. This SSID is tied to WLC interface 'inf_guest' on Foreign and Anchor controllers.

We also have 'employee' SSID that is set as Flexconnect and it locally switch at the remote offices. This SSID is tied to WLC interface 'inf_employee' with dummy IP of 192.168.x.x with Vlan ID which i think is also dummy may be. 

I want to add new visitors SSID 'visitors_Local' as FlexConnect and webauth so guest traffic can egress locally from remote office internet circuit instead of coming all the way to HQ. No configs changes required for this on Anchors I believe. 

Question, when creating the new FlexConn SSID 'visitors_Local' Can I use the exiting interface 'inf_employee' or do I need to configure separate interface for this new SSID?

Thanks

[Rasika Nayanajith · Accepted solution]

Yes, you can use same interface. 

Since it is FlexConnect Local Switching, no impact on what interface you select on WLC, hence go with dummy interface.

HTH

Rasika

*** Pls rate all useful responses ***