01-14-2013 03:16 AM - edited 07-03-2021 11:20 PM
Hi ya'll,
I have setup'd two 1142 AP's as mesh.
The sceneario is like this:
MAP ------ RAP---------SW----------Router
I've done all the configuration through my WLC (Flex7500) and the mesh neighborship is up.
The problem is not the MAP nor the RAP broadcasts my SSID.
I've joined them to the same SSID and nothing.
Any thoughts would be greatly appreciated.
Omer.
Solved! Go to Solution.
01-14-2013 07:14 AM
Eli,
The FlexConnect doesn't support mesh APs. This link will explain what features are not supported by the Flex 7500
https://supportforums.cisco.com/docs/DOC-23474
Sent from Cisco Technical Support iPhone App
01-14-2013 07:14 AM
Eli,
The FlexConnect doesn't support mesh APs. This link will explain what features are not supported by the Flex 7500
https://supportforums.cisco.com/docs/DOC-23474
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide