Can't see the SSID with mesh AP's

[elilimor3005]

Hi ya'll,

I have setup'd two 1142 AP's as mesh.

The sceneario is like this:

MAP ------ RAP---------SW----------Router

I've done all the configuration through my WLC (Flex7500) and the mesh neighborship is up.

The problem is not the MAP nor the RAP broadcasts my SSID.

I've joined them to the same SSID and nothing.

Any thoughts would be greatly appreciated.

Omer.

[Scott Fella · Accepted solution]

Eli,

The FlexConnect doesn't support mesh APs. This link will explain what features are not supported by the Flex 7500

https://supportforums.cisco.com/docs/DOC-23474

Sent from Cisco Technical Support iPhone App