All,I have a 300 AP Wism blade into a VSS chassis. Is there a good way to disable communication to the controllers on the wism? I'd like to remove the two controllers form the network with a software command as this is a remote location. I underst...
I can't get Cisco IP Communicator to find TFTP servers by DHCP when it starts up on the Wireless LAN. It works fine on the Wired LAN.The Wireless LAN is otherwise working fine. Clients can get an IP address by DHCP and use the network normally.When I...
Hi,We have a 4404 controller and 1010/1131 access points. We use enterprise authentication. Windows AD environment. Clients are mainly Windows 7.The problem at the moment is, users are having to enter their logon details at least twice, sometimes thr...
Had various issues with WLC recently. Still not sure if it's WLC or LAP that's causing issue.Here are the logs:5Thu Mar 29 16:20:10 2012AP Disassociated. Base Radio MAC:c4:71:fe:42:15:ac6Thu Mar 29 16:20:10 2012AP's Interface:1(unknown type) Operati...
Hello,I have 10 AIR-LAP1131AG-A-K9 connected to a 4402 controller. I have a couple of questions:- When I go into CONFIGURE/ACCESS POINT, one of the AP's has the message "**Configuration is different on the Device**". How do I connect directly to th...
Bruce TiffWelcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to ask questions and learn about the Cisco OfficeExtend 600 Series Solution that comprises the Cisco Aironet® 600 Series OfficeExtend Access Points,...
helloI have to create a ssid and configure security with encryption and password wap ascii "log2011mfe"I set it up via telnet command with the deputy and all is well finished with crltZ and all is well, but when the web server aironet, tells me that ...
Hi there, Could someone point me in the right direction with regards to the following? I have a requirement to set up a guest SSID for contractor so that they can use the internet while in the office.Security say that all traffic on this SSID should ...
I have a new site I am bringing up in Japan, but I have my controllers based in a DC in Australia. I am curious if there are any latency limitations to consider when installing the AP's. I am using 3502i's. I know with HREAP, there is a 300 ms lim...
I need a WCS report that will actually give me the top n Wireless Access points that have too many clients trying to authenticte to them.We have some serious capacity issue in meeting rooms but we need a ball park figure of how many WAPs might be aff...
Hi AllDoes anyone know what sort of performance statistics can be obtained for APs from a Wireless LAN Controller using SNMP and the Cisco MIBs?We were previously providing performance statistics from autonomous APs and would like to provide somethin...
Hi,I configured one vlan and trying to authenticate it through radius server.My objective is when a internal users want to connect through this SSID they just put username and password and authenticate through Radius server. Another vlan is getting a...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
.png "Hall of Fame"){kind=icon}
