09-04-2012 05:45 AM - edited 07-03-2021 10:36 PM
I'm trying to turn off the LED on a Cisco Aironet 1141 p/n AIR-AP1141N-A-K9. This is a standalone AP and from the CLI I'm issuing this command:
ap(config)#led display off
The LED does not turn off after typing this command. If I do `show run' it shows up in the config so the command was accepted. Is there a different way to turn off the LED? I'm running IOS Version 12.4(21a)JA1.
Solved! Go to Solution.
09-05-2012 04:53 AM
If you have the 1141 AP under warranty you can send an e-mail to tac@cisco.com with the AP serial number and they can publish you the image you request.
You want to say "Thank you"?
Don't. Just rate the useful answers,
that is more useful than "Thank you".
09-04-2012 04:54 PM
Could be a bug on the code. Maybe try upgrading the IOS.
09-05-2012 04:46 AM
It doesn't look like I can download an IOS upgrade from Cisco without a support contract. I just purchased the 1141, seems like I should get free upgrades for a little while at least.
09-05-2012 04:53 AM
If you have the 1141 AP under warranty you can send an e-mail to tac@cisco.com with the AP serial number and they can publish you the image you request.
You want to say "Thank you"?
Don't. Just rate the useful answers,
that is more useful than "Thank you".
09-04-2012 10:24 PM
Your image is very old. It could be buggy.
I agree with Leo that you try to upgrade to latest and check.
HTH
Amjad
You want to say "Thank you"?
Don't. Just rate the useful answers,
that is more useful than "Thank you".
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide