08-05-2020 01:01 PM - edited 07-05-2021 12:22 PM
We are looking to deploy another 1562E-B-K9 to a light pole in the middle of a parking lot. We will have a multi-mode fiber running and street light providing power to the device, leaving the Ethernet port open.
Is it possible then to use the vacant Ethernet port as a pass-through or switch if we also wanted to have it power a PoE IP Camera on the same pole?
Solved! Go to Solution.
08-06-2020 12:44 AM
- Looks like not , ref : https://www.cisco.com/c/en/us/td/docs/wireless/access_point/1560/installation/guide/1560hig/1560_ch1.html
>...
1.Either the SFP port or the Gigabit Ethernet port can be used as the uplink port, However, if the SFP port is in use, then the Ethernet port cannot be used as a local client port.
M.
08-06-2020 12:44 AM
- Looks like not , ref : https://www.cisco.com/c/en/us/td/docs/wireless/access_point/1560/installation/guide/1560hig/1560_ch1.html
>...
1.Either the SFP port or the Gigabit Ethernet port can be used as the uplink port, However, if the SFP port is in use, then the Ethernet port cannot be used as a local client port.
M.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide