cannot ping WAP 1141

[abukuru95]

hello Guys, i have an AP connected to a gigabit interface on my switch. all seems well configured.a show cdp neighbors command on the neighboring switch shows my AP as a neighbor with its IP address settings.A  ping to the AP is not successful. trunking between the switch and AP is good with the allowed vlans configured on the switch interface and trunking configured.the allowed vlans on the switch correspond to the vlans on the AP.

what would this be ? before, it was functional but now not working.

any help on this is welcome.

[Nicolas Darchis · Accepted solution]

Maybe you can post your switch and ap configuration ?

[abukuru95]

hello Nicolas, here is the config for switch interface and AP. thanks in advance.

[dmantill · Accepted solution]

LOL easy cake...

Even if you spcify the vlan ID as native you need to allow that vlan with the switchport trunk allowed command, add 99 and that should do it.

[abukuru95]

thanks for the help Dmantill.

[dmantill]

And thanks to Nicolas that requested the right information.

[abukuru95]

thanks for the help Nicolas.

problem solved due to the published config. you requested.