cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
913
Views
0
Helpful
3
Replies

CAP1532 cannot join to WLC

xuzhengyi1995
Community Member

Hi,

Have a problem of join a CAP1532 to a WLC2504, the two devices could ping each other and on 2504 I could see the AP in the ap join statistics, but it seems like the AP does not receive the response from WLC.

I configured both DHCP and DNS, tried use DHCP and static ip, but seems got the same problem.

I have some 2702 and they work well.

Ap bundle is also installed in the WLC.

Hope could get some help, thanks!

WLC 2504:

Software Version8.5.171.0

xuzhengyi1995_0-1665239736702.png

1532:

Cisco IOS Software, C1530 Software (ap1g3-K9W8-M), Version 15.3(3)JF9, RELEASE SOFTWARE (fc1)

LWAPP image version 8.5.140.0

*Mar 1 00:50:01.419: %CAPWAP-3-EVENTLOG: Could not discover any MWAR.
*Mar 1 00:50:01.419: %CAPWAP-3-EVENTLOG: Starting Discovery. Initializing discovery latency in discovery responses.
*Mar 1 00:50:01.419: %CAPWAP-3-EVENTLOG: CAPWAP State: Discovery.
*Mar 1 00:50:01.419: %CAPWAP-3-EVENTLOG: Not waiting for DHCP options as resolve method on interface BVI1 is 4
*Mar 1 00:50:01.419: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Adding default route for gateway 192.168.0.1
*Mar 1 00:50:01.419: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - gateway found 192.168.0.1
*Mar 1 00:50:01.419: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Adding default route for gateway 192.168.0.1
*Mar 1 00:50:01.419: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - gateway found 192.168.0.1
*Mar 1 00:50:01.419: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Adding default route for gateway 192.168.0.1
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)

*Mar 1 00:50:11.423: %CAPWAP-3-EVENTLOG: Could not discover any MWAR.
*Mar 1 00:50:11.423: %CAPWAP-3-EVENTLOG: Starting Discovery. Initializing discovery latency in discovery responses.
*Mar 1 00:50:11.423: %CAPWAP-3-EVENTLOG: CAPWAP State: Discovery.
*Mar 1 00:50:11.423: %CAPWAP-3-EVENTLOG: Not waiting for DHCP options as resolve method on interface BVI1 is 4
*Mar 1 00:50:11.423: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Adding default route for gateway 192.168.0.1
*Mar 1 00:50:11.423: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - gateway found 192.168.0.1
*Mar 1 00:50:11.423: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Adding default route for gateway 192.168.0.1
*Mar 1 00:50:11.423: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - gateway found 192.168.0.1
*Mar 1 00:50:11.423: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Adding default route for gateway 192.168.0.1
*Mar 1 00:50:15.099: %CAPWAP-3-EVENTLOG: No changes in lwapp configs
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)

3 Replies 3

xuzhengyi1995
Community Member

Logs on WLC:

*spamApTask3: Oct 09 09:06:02.641: 00:b6:70:40:de:90 Discovery Request from 192.168.0.101:62899

*spamApTask3: Oct 09 09:06:02.641: 00:b6:70:40:de:90 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 75, MaxLicense=75 joined Aps =5
*spamApTask3: Oct 09 09:06:02.641: 00:b6:70:40:de:90 apType = 34 apModel: AIR-CAP1532I-H-K9

*spamApTask3: Oct 09 09:06:02.641: 00:b6:70:40:de:90 apType: Ox22 bundleApImageVer: 8.5.171.0
*spamApTask3: Oct 09 09:06:02.641: 00:b6:70:40:de:90 version:8 release:5 maint:171 build:0
*spamApTask3: Oct 09 09:06:02.641: 00:b6:70:40:de:90 Discovery Response sent to 192.168.0.101 port 62899

*spamApTask3: Oct 09 09:06:02.641: 00:b6:70:40:de:90 Discovery Response sent to 192.168.0.101:62899

Repeat...

xuzhengyi1995
Community Member

Logs on 1532:

*Mar 1 00:51:19.811: %CAPWAP-3-EVENTLOG: Starting Discovery. Initializing discovery latency in discovery responses.
*Mar 1 00:51:19.811: %CAPWAP-3-EVENTLOG: CAPWAP State: Discovery.
*Mar 1 00:51:19.811: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Adding default route for gateway 192.168.0.1
*Mar 1 00:51:19.811: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - gateway found 192.168.0.1
*Mar 1 00:51:19.811: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Adding default route for gateway 192.168.0.1
*Mar 1 00:51:19.811: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - gateway found 192.168.0.1
*Mar 1 00:51:19.811: %CAPWAP-3-EVENTLOG: Discovery Request sent to 192.168.0.33 with discovery type set to 2
*Mar 1 00:51:19.811: %CAPWAP-3-EVENTLOG: Discovery Request sent to 192.168.0.33 with discovery type set to 3
*Mar 1 00:51:29.811: %CAPWAP-3-EVENTLOG: Could not discover any MWAR.
*Mar 1 00:51:29.811: %CAPWAP-3-EVENTLOG: Starting Discovery. Initializing discovery latency in discovery responses.
*Mar 1 00:51:29.811: %CAPWAP-3-EVENTLOG: CAPWAP State: Discovery.
*Mar 1 00:51:29.811: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - Adding default route for gateway 192.168.0.1
*Mar 1 00:51:29.811: %CAPWAP-3-EVENTLOG: spamResolveStaticGateway - gateway found 192.168.0.1% Nameserver entry 192.168.0.100 does not exist

Not in Bound state.
*Mar 1 00:51:35.191: %CAPWAP-3-EVENTLOG: No changes in lwapp configs
*Mar 1 00:51:35.331: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
*Mar 1 00:51:35.331: %CAPWAP-3-EVENTLOG: Discovery failed 5 times. Release/Renew DHCP

Repeat...

Rich R
VIP
VIP

What is the WLC IP address?
What discovery method are you using?
I'm going to guess they're sitting on the same LAN/VLAN and you're relying on local subnet discovery.
So have you added the AP MAC address to AP policy on WLC? https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/98848-lap-auth-uwn-config.html#anc7
Have you checked to make sure you're not affected by https://www.cisco.com/c/en/us/support/docs/field-notices/639/fn63942.html

 

------------------------------
Please click Helpful if this post helped you and Accept as Solution if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's   and   TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's,   Best Practices for 9800 WLC's   and   Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
Field Notice: FN74383 APs Running 17.12.4/5/6/6a May Run Out of Flash Space Preventing Upgrades
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390
Review Cisco Networking for a $25 gift card