06-19-2020 07:10 AM - edited 07-05-2021 12:11 PM
We've one instalation with a Mobility Express (AIR-AP1852I-E-K9C) working with two AIR-AP1852I-E-K9 (Software 8-3-133-0 in the three cases). Recently we bought a new CAPWAP (AIR-AP1852I-E-K9) and we put the software 8-3-133-0 but can't connect with Mobility Express. We've some screens to explain the problem. The light of the capwap is blinking Red-Orange-Green-Red-Orange-Green...
Solved! Go to Solution.
06-22-2020 10:24 PM
Please configure the correct time and date (NTP)setting on master AP (WLC) and then try again to join it.
Regards
Dont forget to rate helpful posts
06-22-2020 10:24 PM
Please configure the correct time and date (NTP)setting on master AP (WLC) and then try again to join it.
Regards
Dont forget to rate helpful posts
06-22-2020 11:43 PM
Thanks Sandeep Choudhary for your answer. I'll try next time I'll be at the customer's installation but... how it's posible the others capwap are connected? In spite of this I will try.
06-23-2020 06:29 AM
06-24-2020 02:47 AM - edited 06-24-2020 02:53 AM
Do you recommend me using version 8-151-0?
In the new installations is the version I'm installing.
And... other thing: how can I upgrade to 8.5 the capwap APs when are installed. I know how upgrade Mobility Express by web and I know how upgrade capwap throught console port but I need to bring the capwap to the office to upgrade.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide