12-16-2020 09:36 PM - edited 07-05-2021 12:55 PM
Have a few 1832i(s) that came w/ the CapWap image that I'd like to get going w/ ME instead. I've converted 1 of them to the ME image and I'm able to get into the controller and begin the setup. I have the others on the same vlan as the controller so thought I would be able to convert them directly from the controller as I've done in the past when using a capwap 1832(1832 would show up in the controller and then I'm have the option to convert it to ME). Will the APs join the ME controller if they're on the same vlan? I didn't add an option w/ the controller ip but I do that tomorrow if required.
Controller is running 8.5.161 and the APs shipped with 8.5.140 if it makes any difference.
12-16-2020 10:54 PM
12-17-2020 07:06 AM - edited 12-17-2020 07:45 AM
Thanks. That's what I thought but for some reason I'm not seeing the access points join. I'm not seeing any download requests coming from the access points on the TFTP server.
--
Found the issue. WLC was on a new segment that didn't have internet access so the time was off. Fixed that and almost instantly all the APs popped up in the controller. Now trying to see if i can get them upgraded and converted.
12-17-2020 09:55 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide