01-12-2021 12:21 AM - edited 07-05-2021 12:59 PM
I cannot get my catalyst 9800-L to respond to the IW6300 AP's discovery request. the IP addresses are fine and I can ping the access point and the controller, and I can see the CAPWAP packets with Wireshark come to the controller, but the controller doesn't respond. It just sits there with no errors. Where should be looking for errors.
Solved! Go to Solution.
01-15-2021 08:11 AM
Compatibility Matrix Doc has been updated to reflect the first supported 9800 release for this AP https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html#56735
01-12-2021 04:51 AM
- Check if both platforms are compatible :
https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
M.
01-12-2021 04:18 PM
The support on 9800 WLCs for this AP starts on 17.1 but this release is deferred so try to install 17.3.2a.
I will try to ping the writers of the Compatibility Matrix Doc to update it.
01-15-2021 08:11 AM
Compatibility Matrix Doc has been updated to reflect the first supported 9800 release for this AP https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html#56735
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide