09-02-2020 11:37 PM - edited 07-05-2021 12:28 PM
Hi,
is there any way to change the tags an AP comes up with on the 9800 WLC?
Instead of using "default-policy-tag" it should be auto assigned some other tag available on the WLC.
Cheers
Martin
Solved! Go to Solution.
09-03-2020 03:04 AM - edited 09-03-2020 03:11 AM
As all new APs are registered in the controllers with their MAC address ad the suffix AP before that, you can create a Regex filter to auto-assign tag profiles like this:
ap filter name DEFAULT-TAGS1
ap name-regex ^AP.*
tag policy CORP
tag rf EMEA-OFFICE-SD
tag site OFFICE-SITE
Then check your are allowing AP Filters to assign tags as second source:
wlc# sh ap tag sources
Priority Tag source
--------------------------------
0 Static
1 Location
2 Filter
3 AP
4 Default
HTH
-Jesus
*** Please Rate Helpful Responses ***
09-03-2020 12:24 AM
You have to register those AP to 9800 & then you can change those tag values
HTH
Rasika
*** Pls rate all useful responses ***
09-03-2020 12:28 AM
The only thing I can think of is using EEM script.
I haven't done it so not sure it will work. So maybe based on AP name you can assign specific AP tags.
09-03-2020 03:04 AM - edited 09-03-2020 03:11 AM
As all new APs are registered in the controllers with their MAC address ad the suffix AP before that, you can create a Regex filter to auto-assign tag profiles like this:
ap filter name DEFAULT-TAGS1
ap name-regex ^AP.*
tag policy CORP
tag rf EMEA-OFFICE-SD
tag site OFFICE-SITE
Then check your are allowing AP Filters to assign tags as second source:
wlc# sh ap tag sources
Priority Tag source
--------------------------------
0 Static
1 Location
2 Filter
3 AP
4 Default
HTH
-Jesus
*** Please Rate Helpful Responses ***
09-03-2020 11:28 AM
This looks promising :) thank you all for the answers!
07-17-2023 12:05 PM
Hi all,
Also two things should be done:
1) After created a tag should be activated with the configuration mode command:
device(config)#ap filter priority 2 filter-name TAG-FILTER-NAME
2) Revalidate the AP tag sources. The AP tag priority become active only after this priviledge exec mode command is configured.
device# ap tag-sources revalidate
Hope to help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide