10-31-2011 12:54 PM - edited 07-03-2021 09:00 PM
I am trying to convert Cisco 1242G access point from Autonomous to Lightweight mode.
I downloaded Tftpd32 server and the Lightweight image c1200-rcvk9w8-tar.124-21a.JA2.tar
and issued the command "archive download-sw /force-reload /overwrite tftp://10.0.0.5/ c1200-rcvk9w8-tar.124-21a.JA2.tar"
But it is showing the following Error message
ERROR: Image family mismatch
10-31-2011 01:09 PM
Hello,
The image you are using is for the 1220/1230 AP families. The 1240 AP has image prefix of c1240 instead of c1200.
So the file you would want is:
c1240-rcvk9w8-tar.124-21a.JA2.tar
Otherwise, the procedure you are using appears to be correct.
-Pat
10-31-2011 02:02 PM
Get the correct IOS and follow the process below:
11-01-2011 07:04 AM
Thank you. I installed the Lightweight image successfully
May I know how to configure for lwapp
Should I need to configure anything on Wireless controller
11-01-2011 01:50 PM
May I know how to configure for lwapp
Should I need to configure anything on Wireless controller
You need to do all your configuration on the WLC. This is the main purpose of the WLC.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide