cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2035
Views
5
Helpful
4
Replies
marco_agroup
Beginner

cisco 1702i Access point

Hi, I've purchased a cisco 1702i AP. I need to use it as an autonomous AP and set it via it's onboard web server as I'm used to do with other "low cost" models and brands. Please let me know if it is possible and how to do it. I'm not sure the process is the conversione between CAPWAP or LWAP and IOS...

Please help.

marco.

2 ACCEPTED SOLUTIONS

Accepted Solutions
Haydn Andrews
Rising star

You need to download the autonomous image from Cisco.com first

Then you can follow the instructions of how to get the image onto the AP from my blog:

https://thewlan.com.au/2016/09/27/configuring-a-cisco-ap-for-site-survey/

 

to go from autonomous to lightweight you can follow:

https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01101110.pdf

*****Help out other by using the rating system and marking answered questions as "Answered"*****
*** Please rate helpful posts ***

View solution in original post

Sandeep Choudhary
VIP Mentor

More info regarding conversion:

 

https://www.youtube.com/watch?v=nvgnhGO8_5Q

https://www.youtube.com/watch?v=pdYTxgEcpTc

 

Regards

Dont forget to rate helpful posts

View solution in original post

30% off ITProTV Training: https://winyourwealth.com/learnit LinkedIn: https://www.linkedin.com/pub/jorge-almazan/43/49a/b99Likes and Subs are Appreciated. Fe...
Easy method to convert a Cisco AP from LWAPP or CAPWAP AP into Autonomous Standalone mode.
4 REPLIES 4
Haydn Andrews
Rising star

You need to download the autonomous image from Cisco.com first

Then you can follow the instructions of how to get the image onto the AP from my blog:

https://thewlan.com.au/2016/09/27/configuring-a-cisco-ap-for-site-survey/

 

to go from autonomous to lightweight you can follow:

https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01101110.pdf

*****Help out other by using the rating system and marking answered questions as "Answered"*****
*** Please rate helpful posts ***

View solution in original post

Good morning Haydn.
Thanks for the info.
They're clear, but once I try to download the Autonomous image from cisco.com, it reply that I must be a Cisco partner to be allowed.
We are an HVAC manufacturing Company and not a Cisco partner of course.
I've reguarly purchased the1702i on a website.
Are there any possibility for a customer to download the firmware, i.e providing the S/N of the unit or whatever to get the Cisco authorization?

Many thanks.

Marco.

Sandeep Choudhary
VIP Mentor

More info regarding conversion:

 

https://www.youtube.com/watch?v=nvgnhGO8_5Q

https://www.youtube.com/watch?v=pdYTxgEcpTc

 

Regards

Dont forget to rate helpful posts

View solution in original post

30% off ITProTV Training: https://winyourwealth.com/learnit LinkedIn: https://www.linkedin.com/pub/jorge-almazan/43/49a/b99Likes and Subs are Appreciated. Fe...
Easy method to convert a Cisco AP from LWAPP or CAPWAP AP into Autonomous Standalone mode.

Can i ask i have ap 1702i coverted from w8 to w7 all is ok,but when i log in gui and try save anything i have error 404 no found
Create
Recognize Your Peers
Content for Community-Ad