Cisco 1832 - Bug - CDP

[shamg1974]

Hello all,

I'm dealing with bug CSCvd86274...

Symptom:
"show cdp neighbor" at the Switch side shows the AP Platform as "Unknown" instead of AIR-APXXXXX-K9

The workaround says to :

2) Break the boot process, go to u-boot>> and do the following:
u-boot>> setenv FACTORY_RESET 0
u-boot>> saveenv
u-boot>> reset

I cannot figure out how to break the boot process to get to this "u-boot". I'm running Windows 10, if that matters...Can anyone tell me how to do this?

Thanks,

Bobby Grewal

[Alex Pfeil]

Try this.

https://community.cisco.com/t5/wireless-and-mobility/interrupting-the-boot-process-on-an-aironet-1242ag-ap/td-p/1916040

Please mark helpful posts.