cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
297
Views
15
Helpful
3
Replies
Highlighted
Beginner

Cisco 2702 image issue

Dear All,

 

I have 2702 Lightweight AP & I try to convert the same in Autonomous AP by changing firmware ap3g2-k9w7-tar.153-3.JPK.tar. Only challenge I am facing during firmware upload from TFTP server to AP. AP try to discover WLC & change static Interface IP to DHCP. Method change from Manual to DHCP so communication between TFTP & Machine is break.

Is it possible to disable WLC discovery by any CLI command so I can easily upload autonomous image to AP. Please find the error screenshot in attachment. Please suggest command so BVI AP interface will not change interface type manual to DHCP automatically.

 

ERROR:

 

AP00f2.8b01.b


AP00f2.8b01.ba40#
AP00f2.8b01.ba40#
Not in Bound state.
*Mar 1 02:49:33.727: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP ad dress is not assigned or assigned IP is wrong. Renewing DHCP IP.
AP00f2.8b01.ba40#

 

 

 

 

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
VIP Mentor

There is no way you can disable CAPWAP discovery process in a light weight AP. 

 

Check this post, it may help you.

https://community.cisco.com/t5/wireless/can-you-turn-off-controller-discovery/td-p/1928871

 

Regards

Dont forget to rate helpful posts

View solution in original post

3 REPLIES 3
Highlighted
VIP Advisor

 

 - Check if you may find some useful hints in this article :

              https://www.semfionetworks.com/blog/convert-a-cisco-capwap-ap-to-a-mobility-express-ap

 M.

Highlighted

HI Marce,

 

Its not working even commands mention on article is not working.

 

f2.8b01.ba40#
AP00f2.8b01.ba40#
Not in Bound state.
*Mar 1 00:13:28.147: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
Not in Bound state.
*Mar 1 00:14:18.147: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
Not in Bound state.
*Mar 1 00:15:08.147: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
Not in Bound state.
*Mar 1 00:15:58.147: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
AP00f2.8b01.ba40#

Highlighted
VIP Mentor

There is no way you can disable CAPWAP discovery process in a light weight AP. 

 

Check this post, it may help you.

https://community.cisco.com/t5/wireless/can-you-turn-off-controller-discovery/td-p/1928871

 

Regards

Dont forget to rate helpful posts

View solution in original post

Content for Community-Ad