Thank you for the response.
I have managed to get 2 out of the 4 access points to Join the Cisco 3650 MC, however the operation state remains down and the Access point is in HREAP mode which says is unsupported on this platform (See below), Could you possibly guide me with the supported IOS version that i could make use of an possibly do upgrades later on.
Switch1#sh ap summary
Number of APs: 2
Global AP User Name: Not configured
Global AP Dot1x User Name: Not configured
AP Name AP Model Ethernet MAC Radio MAC State
----------------------------------------------------------------------------------------
APDCF7.1908.3398 1832I dcf7.1908.3398 dcf7.1909.2d60 Down
APDCF7.1908.33A8 1832I dcf7.1908.33a8 dcf7.1909.2da0 Down
!
Dec 18 12:59:16.071: %IOSXE-3-PLATFORM:Switch 1 R0/0: wcm: AP dcf7.1909.2d60 is in HREAP mode and is unsupported on this platform, this AP has been disabled.
Dec 18 12:59:16.696: %LINEPROTO-5-UPDOWN: Line protocol on Interface Capwap1, changed state to up
Dec 18 12:59:35.773: %LINK-3-UPDOWN: Interface Capwap0, changed state to up
Dec 18 12:59:36.151: *%CAPWAP-3-AP_UNSUPPORTED_MODE_ERR:Switch 1 R0/0: wcm: AP dcf7.1909.2da0: REAP mode AP is not supported on this platform.The AP joined in an unsupported mode and is put into inoperative state.
Dec 18 12:59:36.152: %IOSXE-3-PLATFORM:Switch 1 R0/0: wcm: AP dcf7.1909.2da0 is in HREAP mode and is unsupported on this platform, this AP has been disabled.
Dec 18 12:59:36.774: %LINEPROTO-5-UPDOWN: Line protocol on Interface Capwap0, changed state to up
Regards,
Nitesh
