Cisco 3850 WLC - Captive bypass portal

[Kanes Ramasamy]

Hi Team,

Good Day. 

If I were to disable the captive bypass portal on the 3850, do i need to reboot the device for the command to take affect?

I have performed the config on the 5500 series WLC and i had to reboot it for the command to take affect? 

Would it be the same?

Please assist. 

Regards,

Kanes.R

[Scott Fella]

Is there a command on the CA platform for this?  If so, why not try it and see. From this guide, it doesn't show any bypass commands for CA:

http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine-21/200565-Configure-ISE-Wireless-CWA-and-Hotspot-F.html#anc12

-Scott 

*** Please rate helpful posts ***