12-14-2014 07:07 PM - edited 07-05-2021 02:07 AM
Hi Guys,
Is it possible to do time base access for Cisco 5500, like per AP or SSID active from 8am - 8pm? Thanks
12-14-2014 07:14 PM
Hi.
Yes you can, but you need a WCS to do this.
Please check: Scheduling Radio Status
**please rate useful answers**
12-14-2014 07:20 PM
There are a few different ways to achieve this. If you search on this forum, you will feel bs ways to do this if you have WCS/NCS/PI. You can also achieve this using local policies:
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/config_guide/b_cg75/b_cg75_chapter_0111100.html
If your SSID is using 802.1x, you can also configure a radius policy to only allow authentication between certain times. Here is a link to Microsoft NPS for time based restrictions. Many radius server has similar setup.
http://technet.microsoft.com/en-us/library/cc731220%28v=ws.10%29.aspx
-Scott
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide