Wireless

Hi, CVD reg. LAN and WLAN of August 2016 (www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/Aug2016/Campus_LAN_Wireless_LAN_Design_Aug2016.pdf) is recommending the following design (page 31 and 32): "Spreading the ports from the active and standby WLC...

Hi! We ordered a WLC HA Bundle with 2x5508 controllers. Accidentally I swapped both WLC when I configured them. After everything was installed, I noticed that there were no licences. Is there a way the get the licences from the backup WLC and move t...

Hi  I am trying to connect to a cisco network that authenticates users by eap-peap. I am using linux Ubuntu and have manually entered the settings that I could find on the internet. network={ ssid="Imperial-WPA" priority=1 p...

Hi everyone , i have some doubts with de LWAPP AIR-AP1572EAC-A-K9 , beacuse i have a WLC5508 with this description : - WLC 5508 - software version 7.4.121.0 - Field Recovery Image Version 7.6.95.16 This ap is compatible with this WLC version ? Tha...

HELP, I have some problem with configuring the duplex and speed of AIR-AP1832I-H-K9 POE port. I cannot even find the command. Here is what I found in the CLI window. I login the AP by SSH. Password: 2728#Exec mode commands  ap-type       Set the acce...

Hi, We have checked randomly on 20 - 30 WLC 's and their associated access points by logging into each controller. Below is the mentioned path of controller: Monitor > Access Points > Radios > 802.11x/y/z  >  AP Name>details Even though clients are s...

Hi All, I've got a customer issue with Window 10 devices not connecting to an Autonomous Access Point  Cisco 1702i series version15.3(3)JAB. It works with windonws 7 but with an upgrade to windows 10, they stopped connecting to the AP. the windons ...

Hi As a company we are looking at getting Meraki 1/ I was thrown by the fact that Meraki, have their own switch models, are Meraki AP's compatible with any Cisco switch that supports POE ? 2/ I know the management traffic only goes via the Cisco c...

Hello Experts, My requirement is as such to restrict port specific traffic for a specific WLAN. There is an option of creation of ACLs but it is only for protocols and my requirement is to have them enabled at port level for allowing only email traf...

I just purchased an Aironet AP AIR-AP-2702i-UXK9 which by default comes in lightweight mode. I am looking to use it in standalone mode and need some help. 1) What is the procedure and process. I've reviewed some steps, but seems that I'm either miss...

I just purchased an Aironet AP AIR-AP-2702i-UXK9 which by default comes in lightweight mode. I am looking to use it in standalone mode and need some help. 1) What is the procedure and process. I've reviewed some steps, but seems that I'm either miss...

Unable to delete!

I have an Aironet 1252 that is acting as a root bridge with wireless clients; there are a total of 2 wireless SSIDs and 1 infrastructure SSID on the AP with 4 VLANs passing through it. There is a single Aironet 1142 that is connecting to the infrastr...

Unable to delete