Wireless

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Labels

Forum Posts

Hibased on article http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008067489f.shtmlIs it possible or how should I design captive portal without WLC.In our organization, I have about 20 AP (various models) running o...

manan1978 by Community Member
  • 725 Views
  • 1 replies
  • 0 Helpful votes

What requisites are there for configuring three AIR-LAP1131AG-A-KP v03 LAPs with an AIR-WLC2006-K9?the LAPs are on c1130-rcvk9w8-tar.124-10b.jda, the WLC is 3.2.78.0What do I need to do to make this work?Thank you!

jalinker by Community Member
  • 1190 Views
  • 3 replies
  • 0 Helpful votes

My client wants to upgrade from several consumer grade WAPs to something with better roaming/mobility capabilities.  I think the 2500 controller would do the job but I'm not sure which access points will work with the controller.  Do I go with the 16...

joe by Community Member
  • 1629 Views
  • 5 replies
  • 0 Helpful votes

I need to implement a Cisco Wireless Controller. We will be deploying 1262 AP's, 5 at the corporate site and eventually the plan is to deploy AP's to the the 7 other remote sites, connected via VPN tunnels using Cisco ASA. Total Wireless will be at l...

I am looking for best practices for web authentication on a WLC. New to the WLC and am wondering if the web authentication local to the WLC, no radius or LDAP,  requires one user per connection on a guest wireless?I don't have the finances to properl...

Hi everyone,We are in the process of deploying external WiFi at our company.  Basically, this will be provided through a completely segregated Internet line and we will not be using any of our internal infrastructure for routing etc.  We're consideri...

We have a few foreign controllers and two guest anchor controllers in DMZ for guest users. In the foreign controllers, guest SSID was configured with the two DMZ controllers as mobility anchors. My question is that in the two DMZ guest anchor control...

FrankZ49 by Frequent Visitor
  • 1213 Views
  • 2 replies
  • 0 Helpful votes

I have a WLC model 4402 running 7.0.235.3. I am trying to make a CAP2602 to join the WLC but it is unable to. Doesn't the 4402 with this software support the 2602? The WLC has a license for 12 AP's, only 9 in use. Currently there are only AIR-LAP1131...

bvj197222 by Level 5
  • 2273 Views
  • 3 replies
  • 0 Helpful votes

I'm testing my new wireless setup, I have the following:pair of 5508 Internal Controllers (running 7.3.101.0 Field image 7.0.112.21)pair of 5508 DMZ Controllers (running 7.3.101.0 Field image 7.0.112.21)ISE VMWare ServerAP's 3600 (AIR-CAP3602I-E-K9)M...

Hi We have a Cisco WLC based wireless network and provide a guest network for visitors. Currently we are using the built in lobby admin tool to create guest accounts, but it is very limited. The password auto generation gives you a popup in Internet ...

Review Cisco Networking for a $25 gift card