06-14-2015 01:16 AM - edited 07-05-2021 03:24 AM
Hi Experts,
Can you please advise if Cisco 5760 support Client SSO?
Regards,
Manuelito
Solved! Go to Solution.
06-14-2015 06:50 AM
The release guides along with the configuration guides will state all the features. The 5760 has no support for client sso at this time. The AireOS has more feature rich enhancement than what you will find in a converged access deployment. This is how it has been, CA has always been behind the AireOS product and hopefully one day it will catch up.
-Scott
06-14-2015 01:39 AM
06-14-2015 01:53 AM
Hi Leo,
Release 3.3 supports only AP SSO. Clients still will be deauthenticated and reauthenticated. I have read that in 5500 series, with code 7.5, Client SSO is supported.
Regards,
Manuelito
06-14-2015 06:50 AM
The release guides along with the configuration guides will state all the features. The 5760 has no support for client sso at this time. The AireOS has more feature rich enhancement than what you will find in a converged access deployment. This is how it has been, CA has always been behind the AireOS product and hopefully one day it will catch up.
-Scott
06-14-2015 06:58 AM
Hi Scott,
Thanks for the very useful information.
Regards,
Manuelito
06-23-2015 05:58 PM
HA with AP SSO is supported in Cisco 5700 Series Wireless Controllers. IOS XE 3.3 release only supports AP SSO i.e. APs will not disconnect and continue to be associated to the controller after a switchover. However, all clients will be de-authenticated and forced to rejoin new the Active WLC because Client SSO is not supported with this release.
Please refer to the below link :
http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/5700/software/release/ios_xe_33/5760_HA_DG_iosXE33.html#pgfId-43680
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide