11-19-2018 11:59 AM - edited 07-05-2021 09:28 AM
I have 1 fiber connection in a port-channel for the 8540 Wireless Controller that consistently shows Received Packets with MAC Errors, FCS errors. Only on 1 port out of the port-channel. Before i start swapping out fiber cable or SPFs on the WLC or the far side, which is a cisco WS-C6506-E switch, i wanted to get a second set of eyes. Does this look to be physical issue?
All other ports in port-channel are clean on WLC side, no errors.
11-19-2018 10:10 PM
11-20-2018 07:20 AM
This is the output of "sh int counters" on the ten Gig interface on the 6500 side.
64 bit counters:
0. rxHCTotalPkts = 88541569180
1. txHCTotalPkts = 69256567692
2. rxHCUnicastPkts = 88527351877
3. txHCUnicastPkts = 69254242708
4. rxHCMulticastPkts = 8006820
5. txHCMulticastPkts = 2178282
6. rxHCBroadcastPkts = 6210482
7. txHCBroadcastPkts = 146702
8. rxHCOctets = 61072862770109
9. txHCOctets = 43574040146585
10. rxTxHCPkts64Octets = 9147965971
11. rxTxHCPkts65to127Octets = 17553140559
12. rxTxHCPkts128to255Octets = 55731770417
13. rxTxHCPkts256to511Octets = 8130856020
14. rxTxHCpkts512to1023Octets = 8320946988
15. rxTxHCpkts1024to1518Octets = 58913456928
16. txHCTrunkFrames = 0
17. rxHCTrunkFrames = 2642009593
18. rxHCDropEvents = 0
32 bit counters:
0. rxCRCAlignErrors = 9
1. rxUndersizedPkts = 0
2. rxOversizedPkts = 3078882093
3. rxFragmentPkts = 0
4. rxJabbers = 0
5. txCollisions = 0
6. ifInErrors = 22
7. ifOutErrors = 0
8. ifInDiscards = 26
9. ifInUnknownProtos = 0
10. ifOutDiscards = 0
11. txDelayExceededDiscards = 0
12. txCRC = 0
13. linkChange = 9
14. wrongEncapFrames = 0
All Port Counters
1. InPackets = 88541521310
2. InOctets = 61072832347197
3. InUcastPkts = 88527304013
4. InMcastPkts = 8006818
5. InBcastPkts = 6210478
6. OutPackets = 69256545973
7. OutOctets = 43574018400942
8. OutUcastPkts = 69254220990
9. OutMcastPkts = 2178281
10. OutBcastPkts = 146702
11. AlignErr = 0
12. FCSErr = 9
13. XmitErr = 0
14. RcvErr = 22
15. UnderSize = 0
16. SingleCol = 0
17. MultiCol = 0
18. LateCol = 0
19. ExcessiveCol = 0
20. CarrierSense = 0
21. Runts = 0
22. Giants = 13
23. InDiscards = 13
24. OutDiscards = 0
25. InErrors = 22
26. OutErrors = 0
27. InUnknownProtos = 0
28. txCRC = 0
29. TrunkFramesTx = 0
30. TrunkFramesRx = 2641961729
31. WrongEncap = 0
32. Broadcast_suppression_discards = 0
33. Multicast_suppression_discards = 0
34. Unicast_suppression_discards = 0
35. rxTxHCPkts64Octets = 9147961935
36. rxTxHCPkts65to127Octets = 17553131363
37. rxTxHCPkts128to255Octets = 55731756338
38. rxTxHCPkts256to511Octets = 8130850847
39. rxTxHCpkts512to1023Octets = 8320939464
40. rxTxHCpkts1024to1518Octets = 58913427339
41. DropEvents = 0
42. CRCAlignErrors = 9
43. UndersizedPkts = 0
44. OversizedPkts = 3078852504
45. FragmentPkts = 0
46. Jabbers = 0
47. Collisions = 0
48. DelayExceededDiscards = 0
49. bpduOutlost = 0
50. qos0Outlost = 0
51. qos1Outlost = 0
52. qos2Outlost = 0
53. qos3Outlost = 0
54. qos4Outlost = 0
55. qos5Outlost = 0
56. qos6Outlost = 0
57. qos7Outlost = 0
58. qos8Outlost = 0
59. qos9Outlost = 0
60. qos10Outlost = 0
61. qos11Outlost = 0
62. qos12Outlost = 0
63. qos13Outlost = 0
64. qos14Outlost = 0
65. qos15Outlost = 0
66. qos16Outlost = 0
67. qos17Outlost = 0
68. qos18Outlost = 0
69. qos19Outlost = 0
70. qos20Outlost = 0
71. qos21Outlost = 0
72. qos22Outlost = 0
73. qos23Outlost = 0
74. qos24Outlost = 0
75. qos25Outlost = 0
76. qos26Outlost = 0
77. qos27Outlost = 0
78. qos28Outlost = 0
79. qos29Outlost = 0
80. qos30Outlost = 0
81. qos31Outlost = 0
82. bpduCbicOutlost = 0
83. qos0CbicOutlost = 0
84. qos1CbicOutlost = 0
85. qos2CbicOutlost = 0
86. qos3CbicOutlost = 0
87. bpduInlost = 0
88. qos0Inlost = 0
89. qos1Inlost = 0
90. qos2Inlost = 0
91. qos3Inlost = 0
92. qos4Inlost = 0
93. qos5Inlost = 0
94. qos6Inlost = 0
95. qos7Inlost = 0
96. qos8Inlost = 0
97. qos9Inlost = 0
98. qos10Inlost = 0
99. qos11Inlost = 0
100. qos12Inlost = 0
101. qos13Inlost = 0
102. qos14Inlost = 0
103. qos15Inlost = 0
104. qos16Inlost = 0
105. qos17Inlost = 0
106. qos18Inlost = 0
107. qos19Inlost = 0
108. qos20Inlost = 0
109. qos21Inlost = 0
110. qos22Inlost = 0
111. qos23Inlost = 0
112. qos24Inlost = 0
113. qos25Inlost = 0
114. qos26Inlost = 0
115. qos27Inlost = 0
116. qos28Inlost = 0
117. qos29Inlost = 0
118. qos30Inlost = 0
119. qos31Inlost = 0
120. pqueInlost = 0
121. Overruns = 0
122. maxIndex = 0
11-20-2018 09:22 PM
11-21-2018 03:50 AM
Thanks, I just thought it was weird that i have FCS errors counting up only on one interface in port-channel
and all the others are clean.
11-21-2018 03:59 AM
11-21-2018 04:13 AM
Yeah i suppose it could be, but I'm running 8.5.135.0 on other controllers as well and all ports are clean on those.
just this one WLC on one port from a 6500 series. FCS errors from what i understand can be caused by possible bad or dirty fiber jumpers or maybe bad SFP or interface on the 6500? I don't like having errors on my interfaces... haha.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide