cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
656
Views
1
Helpful
3
Replies

Cisco 9130AXE Antennas compatibility

arturo-mosegui
Level 1
Level 1

Hi,

I have a question regarding the number of antennas that I can connect to the 9130AXE.

Using the AIR-CAB002-D8-R= on the 9130AXE, can I connect two AIR-ANT2566P4W-RS= and go 2.4 and 5 GHz on both of them?

Cisco Catalyst 9130AX Series Access Point Getting Started Guide - Cisco

As far as I know, that is not possible with the 9120AXE, as I can connect two 2566 antennas (one directly and the other with the AIR-CAB002-DART-R=), but they will work only on 5GHz.

Cisco Catalyst 9120 Access Point Deployment Guide - Cisco

I guess that whatever the answer is, it applies as well to the 2566, 2524, 2544... and the rest of the compatible antennas.

Thank you,

3 Replies 3

Leo Laohoo
Hall of Fame
Hall of Fame

AIR-ANT2566P4W has two radios.  9130 has three:  1 x 2.4 Ghz, 1 x 5.0 Ghz and a dual-mode 2.4Ghz/5.0 Ghz "micro" radio.  

If this is used, the "micro" radio will need to be disabled. 

Personally, I would not AIR-ANT2566P4W with a Catalyst 9k AP.  

raghav.rai
Level 1
Level 1

Hi Al,

Can I use AIR-ANT2566P4W-DS Antena with Cisco AP C9130AXE ? 

Thanks,

Raghavendra

AIR-ANT2566P4W-R= & AIR-ANT2566P4W-RS= are the supported antennas to use with C9130AXE. Connect to AP using AIR-CAB002-D8-R=.

Jagan Chowdam

/**Pls rate useful responses**/

Review Cisco Networking for a $25 gift card