Cisco Access Point Mac Filtering

[recent2Cisco]

I have a Cisco 3702i AP that's been converted to autonomous.  Is it possible to setup MAC filtering on each SSID that I define?  In this way, only certain devices connect to each individual SSID; example - certain devices connect on the 2.4Ghz SSID and certain devices connect on the 5Ghz SSID.  This would be fantastic if I could do that.

[mohanak]

Refer link : http://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-3-3/cg15-3-3-chap16-filters.html#pgfId-1099666

[recent2Cisco]

johnlloyd_13 and mohanak,

Thank you for your responses.  That does help.

[johnlloyd_13]

hi,

there's no MAC filtering option on autonomous AP to limit which SSID and which radio.

it's also stated per link given by mohanak.

ap(config)#dot11 association ?
  mac-list  filter client with a MAC address access list

ap(config)#dot11 association mac-list ?
  <700-799>  Ethernet address access list

ap(config)#dot11 association mac-list 700 ?
  <cr>

Step 2 Use the global configuration command dott11 association mac-list list-number to apply the use the MAC address access list as a filter for all wireless client associations, on all radios.
Clients not listed in the MAC address access-list will not be allowed to associate to any of the AP SSIDs, on any of the AP radios.