08-10-2016 04:35 PM - edited 07-05-2021 05:36 AM
I have a Cisco 3702i AP that's been converted to autonomous. Is it possible to setup MAC filtering on each SSID that I define? In this way, only certain devices connect to each individual SSID; example - certain devices connect on the 2.4Ghz SSID and certain devices connect on the 5Ghz SSID. This would be fantastic if I could do that.
08-10-2016 06:55 PM
08-11-2016 01:30 PM
johnlloyd_13 and mohanak,
Thank you for your responses. That does help.
08-10-2016 11:08 PM
hi,
there's no MAC filtering option on autonomous AP to limit which SSID and which radio.
it's also stated per link given by mohanak.
ap(config)#dot11 association ?
mac-list filter client with a MAC address access list
ap(config)#dot11 association mac-list ?
<700-799> Ethernet address access list
ap(config)#dot11 association mac-list 700 ?
<cr>
Step 2 Use the global configuration command dott11 association mac-list list-number to apply the use the MAC address access list as a filter for all wireless client associations, on all radios.
Clients not listed in the MAC address access-list will not be allowed to associate to any of the AP SSIDs, on any of the AP radios.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide