Cisco Aironet 1042 AP Authentication using existing RADIUS server

[johnbouman]

I have two Cisco Aironet 1042 AP that are set up to use a WPA2 key, (which is 32 characters and hard to type and not easy to remember), to connect to them. I have a RADIUS Server running on a Windows 2008 server that I would like to use for authentication instead. Can someone help me with this? Thanking you in advance for your assistance.

[Rasika Nayanajith]

Hi

You should be able to find how to configure your AP using below post.  I have used ACS5.2 as RADIUS, you may need to configure windows server accordingly

http://mrncciew.com/2013/11/14/autonomous-ap-with-external-radius/

HTH

Rasika

*** Pls rate all useful responses ***