11-07-2016 02:59 AM - edited 07-05-2021 06:05 AM
I WAS TRYING TO CONVERT CISCO LIGHTWEIGTH T AP TO AUTONOMOUS USING TFTP SERVER AND PUTTY.
IN THE PROCESS THE LWAP CHANGED TO DISCOVERY AND NOT AUTONOMOUS.
PLEASE, WHAT COULD HAVE HAPPENED AND WHAT TO DO TO CORRECT THIS?
THE ATTACHED IS THE PUTTY OUTPUTS.
update
when i issued #show ip int br, radios are not showing
how do i enable the radios?
kindly see the cli commands in th attachment.
Solved! Go to Solution.
11-07-2016 11:08 AM
Check with below post and see you follow the correct procedure
https://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/
HTH
Rasika
*** Pls rate all useful responses ***
11-07-2016 11:08 AM
Check with below post and see you follow the correct procedure
https://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/
HTH
Rasika
*** Pls rate all useful responses ***
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide