04-19-2012 09:31 AM - edited 07-03-2021 10:01 PM
Hi all :
My question here is how is the IP configuration for this Fast Ethernet F0.
This is because usually we only assign IP to the BVI interface. Is it after that, the Fast Ethernet F0 automatically also be assigned the same IP?
As such, when goto the Fast Ethernet F0 by CLI, by using no shut then this will Enable the Fast Ethernet Port?
Thanks!
Best regards,
tangsuan
Solved! Go to Solution.
04-19-2012 07:00 PM
This might help
http://www.scribd.com/doc/47358854/1242-Configuration-guide
Thanks,
Scott Fella
Sent from my iPhone
04-19-2012 09:34 AM
Assign it to the BVI interface and do a no shut.
Thanks,
Scott Fella
Sent from my iPhone
04-19-2012 06:54 PM
Hi Scott :
Thanks for your reply!
I will try and let you know the result.
Best regard,
tangsuan
04-19-2012 07:00 PM
This might help
http://www.scribd.com/doc/47358854/1242-Configuration-guide
Thanks,
Scott Fella
Sent from my iPhone
04-24-2012 11:01 PM
Hi Scott :
The problem is due to the patch line not connect up somewhere. After connect the line up, now the Optical Ethernet line is up.
Thanks for your help on this.
regards,
tangsuan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide