03-14-2014 03:54 AM - edited 07-05-2021 12:25 AM
Hello all,
I have the following challange.
I deployed Cisco vWLC 7.5.102.0 and joined two AP Cisco 2602E which I successfully converted from AP to LAP. Both APs joined vWLC, enabled and show "operational status" REG. On vWLC I enabled broadcast SSID, checked radio 802.11a/b/g/n (enabled) and other things.
But I do not see any SSID (radio signal).
I tried different devices to find SSID (iPhone, Samsung Android phone, Laptop HP (InSSIDer application)).
It looks very strange for me because previousely when I deployed WLC-2500, once I join AP and enabled Radio - I was able to see SSID.
Will be glad to your ideas and ready to provide logs and screenshots.
Solved! Go to Solution.
03-14-2014 04:46 AM
Few things...
If you still have issues, then post the following:
show ap summary
show wlan <wlan id>
03-14-2014 04:46 AM
Few things...
If you still have issues, then post the following:
show ap summary
show wlan <wlan id>
03-16-2014 07:50 PM
Hi Scott Fella,
The problem was with FlexConnect. I changed mode and wireless appeared.
Thank you very much for your help!
05-04-2014 05:21 AM
04-05-2017 05:49 AM
Hi Scott,
Thanks for your help, it works for me ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide