Cisco AP, Cisco WLC

[Orkhan Hajizada]

Hello! How can I schedule restart on Cisco APs that are connected to the Cisco WLC? Thank you!

[Kasun Bandara]

this will help

https://community.cisco.com/t5/wireless/how-to-do-a-scheduled-reboot-through-the-gui/td-p/2714673

[jagan.chowdam]

To immediately reset an AP you can use

config ap reset <ap-name>

If you want to schedule a reboot at a specific, you could use a scheduled task on Cisco Prime Infrastructure, write a small script to reset the AP by cron/SNMP or use EEM on the switch to shutdown/no shutdown the port of the AP at a specific time.

Or you can try Remote into the specific AP and issue the commands following

debug capwap console cli

"reload at <TIME>".

WARNING: WLC firmware 8.8.111.0 has a bug with the "reload at" and/or "reload in". When the command is used, the AP will reboot immediately (refer to CSCvk55805).

CJ

/**Please rate all useful responses**/