Cisco Band Select and Data Rates

[SchurmanRyan]

Is it possible to use Cisco Band Select on a Cisco 5508 WLAN controller and still disable the 802.11b data rates?

[Rob Huffman]

Hi Ryan,

This was tested by Jim in this good thread

https://supportforums.cisco.com/message/3236497#3236497

Cheers!

Rob

[Stephen Rodriguez · Accepted solution]

Yes, you can disable the 'b' data rates and still get the band select, so long as the radio policy in the WLAN is set to all.

HTH,

Steve

----------------------------------------------------------------------------------------------------------

Please remember to rate helpful posts or to mark the question as answered so that it can be found later.