10-25-2022 03:44 AM
What is the difference between the Cisco C9120AXE vs C9120AXP? I know what the datasheet says, but it sounds like to me the only difference is that the E comes with external antennas and the P does not, but the P can support higher gain antennas. The datasheet is very vague.
Can the P work with the same antennas that come with the E?
Thanks.
10-25-2022 05:07 AM
To prevent regulatory violations, it is recommended that you use 9120AXP when high gain antennas are in use.
10-25-2022 05:15 AM
Thanks for that clarification. That should mean the standard external antennas should work and provide the same coverage as the E version?
10-25-2022 05:42 AM
-P has a lower power output compared to -E AP. I haven't tested having low gain antenna's in 9120AXP as I had only few interactions with AXP APs and all the time they were connecting to the Stadium Antenna.
In your case I would stick to Cisco documentation and order different AP models as per the connecting antenna model.
10-25-2022 06:52 AM
This clarifies things much better. I'll stick with the E.
Thanks again.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide